Buffer+

What kind of bypassing does the Buffer+ have?
The Buffer+ uses a relay to switch the boost circuit in and out.
Fri, 22 Aug, 2014 at 11:09 PM
The noise filter doesn't seem to reduce the noise of my setup. Why is that?
The noise filter only reduces high-frequency noise in the buffer+'s loop. If your guitar or amp is noisy, there's nothing the buffer+ can do to he...
Wed, 11 Jun, 2014 at 2:55 PM
Does the boost on the Buffer+ boost at the front or at the end of the chain?
The boost is the last thing before the AMP OUT.
Wed, 23 Jul, 2014 at 3:09 PM
Where do people typically put the buffer+ ?
Generally, the buffer+ should be the first and last thing in your effects chain. Guitar --> Buffer+ guitar in --> buffer+ loop out --> effects...
Fri, 13 Jun, 2014 at 10:19 AM
Should your germ/fuzz be inside the buffer+ loop?
Fuzz pedals, especially vintage ones and retro designs tend to have a very low input impedance which naturally rolls off a lot of high end from your guitar....
Fri, 13 Jun, 2014 at 12:13 PM
Does the Buffer+ boost at the front or the end of the chain?
The buffer+ boosts is the last thing before the AMP OUT.
Mon, 30 Jun, 2014 at 4:41 AM
Would the Buffer+ be suitable for bass guitar (without thinning my sound)?
Yes, the -3dB point of frequency response is just below 20Hz so you should be ok. If your bass has active pickups and you're distorting other pedals in...
Mon, 15 Sep, 2014 at 4:29 PM
Does it matter how much cable is after my Buffer+ ?
Guitar cables typically have a capacitance of about 15pF/foot. With our buffer+, you could run 1037 feet of cable before you see a frequency response that e...
Fri, 13 Jun, 2014 at 1:39 PM
What's the difference between input buffers and input/output buffers?
Our standard Buffer (not Buffer+) is just a single input buffer. There is no buffer at the loop in. The loop in and amp out jacks are simply there for conve...
Fri, 13 Jun, 2014 at 1:45 PM
Will adding a Buffer+ to my chain affect my pedals that have their own buffer?
The Buffer+ certainly won't harm your tone in any way. It's true that it would likely make a more noticeable difference if you had no other buffer...
Fri, 13 Jun, 2014 at 3:58 PM