Yes. But you need to use outputs 5 or 6 of the Voodoo Lab Pedal Power 2+, and have nothing plugged into the other output. For example, if you use output 5 for the VMSD, don't plug anything into output 6. Also, you must set the corresponding DIP switch on the PP2+ away from the NORMAL position. Also, if you have the 230V version of the power supply, we're not sure if it will work. (Let us know if it does for you!)
Can I use the Voodoo Lab Pedal Power 2+ to power the Superdelay, VMSD, Nebulus, or Tape Delay? Print
Modified on: Wed, 30 Dec, 2015 at 11:58 AM
Did you find it helpful? Yes No
Send feedbackSorry we couldn't be helpful. Help us improve this article with your feedback.