If you are running Reverb 5.00 or Echosystem 2.00 or greater, you can now import and export your presets from an SD card.


The SD card must be SDHC or SDXC type and must be formatted with a FAT32 file system.


These instructions are for the Echosystem. For the Reverb, just replace "echosystem" with "reverb".


To export presets to the SD card, make a directory in the root directory of the SD card called "from_echosystem". On startup, Echosystem will populate this directory with presets and the advanced config settings.


To import presets from the SD card, make a directory in the root directory of the SD card called "to_echosystem". Presets that are named NN_echosystem.bin when NN is a number between 0 and 35 inclusive will be loaded into Echosystem memory.