Empress Effects Support

Here are the steps to setting up MIDI on your Tremolo2

1. Go into advanced configuration by holding BOTH stompswitches on start up and give it a few seconds for the BYPASS light to flash twice.

2. Set the waveform switch to SQUARE 

3. Turn the rhythm knob to the MIDI channel you want (rhythm 1 = MIDI channel 1, etc.)

4. Set the waveform switch to TUBE

5. Turn the rhythm knob to number 6 to change the control port to MIDI mode

6. Exit advanced configuration by pressing BOTH stompswitches

The Tremolo2 can use both TRS and TS cables to connect your Tremolo2.

The Tremolo2 uses Type A MIDI, so if you are using other company devices, just make sure you're using the appropriate adapters or settings to convert any different MIDI Types.