Updating Firmware on the Echosystem
Below are instructions on how to update the firmware on your Echosystem. Attached are the firmware files and the changelog. If you'd like to download o...
Wed, 6 Apr, 2022 at 6:11 PM
SD Card requirements for Looper and Updating Firmware
The SD Card requirements are a little bit confusing. SD Requirements to Update the pedal firmware you need: 1 - SD Card has to be SDHC  type (the HC st...
Tue, 17 Jul, 2018 at 9:46 AM
I don't read music, what are the ratios in order from left to right?
RATIO                  CC value 1:3                        10 1:2                        28 2:3                        42 3:4                        56 ...
Tue, 23 Oct, 2018 at 11:28 AM
What are the MIDI CC values for each ratio setting?
RATIO                   CC value 1:3                          10 1:2                          28 2:3                          42 3:4                   ...
Tue, 23 Oct, 2018 at 11:30 AM
Echosystem Manual
Looking for the Echosystem manual?  Here it is!  (download below) If you're wondering what has changed, check out the change-log in the firmware up...
Mon, 14 Dec, 2020 at 9:45 AM
What are Echosystem's minimum/maximum delay times?
Minimum time: All modes have a minimum delay time of 5 milliseconds. Maximum time: Almost all the modes have a tap and knob time. The maximum ta...
Wed, 12 Feb, 2020 at 3:40 PM
Old Firmware Versions for the Echosystem
Here's the old firmware versions. If you want the new firmware versions, go here:
Thu, 22 Oct, 2020 at 10:18 AM
How do I send CV clock from a Eurorack to the Echosystem/Reverb?
Sending CV clock information to the Echosystem is set up the same way as using an external tap switch.  The Echosystem must be in Global(blue tap) mode to r...
Tue, 6 Jul, 2021 at 3:57 PM
Looper on the Echosystem and Reverb causing loud noises.
This is a known issue and we're in the process of fixing it. There are a few FAQs on how to get the looper running on your Echosystem and Reverb. So if...
Tue, 15 Mar, 2022 at 12:29 PM
Using Chase Bliss Audio Faves to toggle between presets
You need to make sure your Echosystem's Control Port is set to MIDI and that it is responding to MIDI channel 2 in advanced configurations. Here are so...
Mon, 28 Mar, 2022 at 1:52 PM