ZOIA
Below are instructions on how to update the firmware on your ZOIA and EUROBURO. Attached are the firmware files and the changelog. How to upgrade your Z...
Wed, 26 Oct, 2022 at 4:47 PM
This spreadsheet of ZOIA's modules strives to keep the user fully informed about the entirety of the module functionality. It also strives to be up to ...
Fri, 22 Mar, 2019 at 3:26 PM
THIS IS ONLY AN ISSUE WITH VERY EARLY ZOIAS, NEW ZOIAS have a built in fix. Here is a guide on how to access the board inside your ZOIA and how to per...
Fri, 19 Mar, 2021 at 11:44 AM
ZOIA will not likely replace your pedalboard out of the box but it has the potential to. It was not designed to be a digital pedalboard and replace al...
Wed, 1 May, 2019 at 4:26 PM
THIS IS ONLY AN ISSUE WITH VERY EARLY ZOIAS, NEW ZOIAS DO NOT NEED A MOD After lots of troubleshooting we have devised a plan for folks with stubborn MIDI ...
Fri, 19 Mar, 2021 at 11:45 AM
The Undo button has been implemented on firmware 2.10. If you want to use the undo feature make sure to update your ZOIA to 2.10 or higher here - https://e...
Mon, 4 Oct, 2021 at 12:49 PM
Looking for the ZOIA manual? Here it is! (download below) If you're wondering what has changed, check out the change-log in the firmware update s...
Thu, 9 Sep, 2021 at 11:56 AM
Here's the old firmware versions. If you want the new firmware versions, go here: https://support.empresseffects.com/support/solutions/articles/1000275...
Mon, 10 Jan, 2022 at 11:35 AM
Generally, you should avoid doing this unless you absolutely need to. All ZOIAs are calibrated during production by a squadron of robotic hockey beavers. T...
Wed, 13 Jul, 2022 at 2:59 PM
No this will not harm your ZOIA. The ZOIA will only respond to voltage from 0-5 volts but sending higher voltage from 5-12 volts will not damage the unit. ...
Fri, 19 Mar, 2021 at 2:16 PM