Can I power my Reverb with a VooDoo Lab PP2+ ?
Yes you can! Use either port 5 or 6 in the NORMAL position with a standard negative tip power chord. If you're having any issues, please contact...
Fri, 2 Mar, 2018 at 11:27 AM
How do I set up a Boss FS-5U as an external tap?
In advanced configuration, set PLATE to #4. BOSS tends to use NC footswitches.
Fri, 2 Mar, 2018 at 3:10 PM
What are the Reverb Factory Preset Settings ?
Mode values : first digit represents the mode and the second digit represents the submode These values start from 0, like it does in code.  So 0,1 would be ...
Wed, 28 Mar, 2018 at 10:11 AM
Reverb Factory Presets - Knob values
Mode values start from 0, like it does in code Mode values : first digit represents the mode and the second digit represents the submode Knob values : 0.0...
Wed, 2 May, 2018 at 11:10 AM
Stuttering in trails
Here we'd like to explain how and why this can sometimes occur. First off, in a perfect world we would be able to run two algorithms simultaneously ...
Wed, 23 May, 2018 at 10:15 AM
Updating Firmware on the Reverb
  Below are instructions on how to update the firmware on your Reverb. Attached are the firmware files and the changelog. How to upgrade your Reverb'...
Mon, 28 Aug, 2023 at 12:59 PM
SD Card Requirements for Looper and Firmware Updating
The SD Card requirements are a little bit confusing. SD Requirements to Update the pedal firmware you need: 1 - SD Card has to be SDHC  type (the HC st...
Thu, 4 May, 2023 at 12:22 PM
Reverb Manual
Looking for the Reverb manual?  Here it is! (download below) If you're wondering what has changed, check out the change-log in the firmware update s...
Mon, 14 Dec, 2020 at 9:42 AM
Old Firmware for the Empress Reverb
Here are all the old firmware updates for the Reverb. For the newest firmware and instructions for the instillation please go here - https://empresseffects....
Tue, 13 Jul, 2021 at 11:50 AM
Using Chase Bliss Audio Faves to toggle between presets
You need to make sure your Reverb's Control Port is set to MIDI and that it is responding to MIDI channel 2 in advanced configurations. Here are some sc...
Mon, 28 Mar, 2022 at 1:49 PM